Carla Smith is working on a long term project to replace Nilstat relays.
read more > talk to someone >Top Energy expanded their Ngawha Geothermal Power Station, which included contracting Ormat to install a new Ormat Energy Converter (OEC) system and a 20 MVA generator. Ergo’s role was to provide an upgrade to accommodate this increase in capacity.
read more > talk to someone >Ross Dodd has been working on a project retrofitting new voltage regulation and transformer management relays.
read more > talk to someone >Scott Wilson has managed the replacement of Pacific Steel’s equipment without impacting on production.
read more > talk to someone >Ergo completed protection upgrade projects for many Vector substations. Old Nilstat Relays were replaced with modern digital relays, capable of full SCADA. The scope included a complete refurbishment of the control panels, SCADA, circuit breakers and the drawing system.
read more > talk to someone >Ripple plant upgrades are not a particularly common occurrence within an electricity network because the equipment typically lasts 30 to 40 years. Such upgrades have, however, become common within Powerco’s network as its ripple plant equipment draws towards the end of its working life.
read more > talk to someone >The Substation, located at the former Westfield freezing works site in Auckland was due for an upgrade.
read more > talk to someone >Te Uku Wind Farm, situated near Raglan, is jointly owned by WEL Networks and Meridian Energy. It consists of twenty-eight Siemens turbines, each with a capacity of 2.3MW. At full capacity they generate 64.4MW of electricity - enough to power 30,000 average-sized New Zealand homes.
A new substation was required for the turbines and for two 33kV circuits - One circuit supplying the WEL Network, the other Transpower’s Te Kowhai substation.
read more > talk to someone >Load growth forecasts for the Matamata region provided the impetus for Powerco’s 2010 upgrade of its Browne Street substation.
read more > talk to someone >In November 2011 the IPENZ Standards & Accreditation Board accepted Ergo's application as a Professional Development Partner (PDP). There are currently only 35 other companies which hold this accreditation.
read more >
PO Box 9717
Newmarket
Auckland 1149
Level 1, 106 Carlton Gore Road
Newmarket
Auckland 1023
Ph: +64 (9) 365 9700
Fax: +64 (9) 365 9701